Installation Guide

Installation Sediment Shower Head 

Step 1: Remove the existing shower head from the shower hose by turning it anti-clockwise. If it’s on tight, use a 6" or 8" adjustable wrench, just be gentle to avoid scratching the surface. 

Step 2:  Screw the shower head onto the shower arm then rotate clockwise to connect the shower head back to the hose.

Step 3: Run water through the filter for 5–10 seconds to activate the Vitamin C and rinse out any loose particles. 

Installation Vitamin C Shower Filter 

Step 1: Turn the shower cord to seperate it from the faucet. 

Step 2: Assemble the shower filter by turning it onto the separated faucet. 

Step 3: Connect the hose to the assembled shower filter and tighten it tightly. 

***Should there be any water leakage from the shower head, ensure that all the o rings have been inserted properly and body parts have been tightened and connected correctly.